Expert Recommended AccessoriesSelected by Joshua, our Expert
Required Accessories9
These accessories are required to properly setup/install this product.
Optional Accessories10
Features
Grade
Contractor
Style
Single Stage 1-Phase
CFM
3
Tank Size
10
Product Video Disclaimer: "PED is not responsible for any variances from the product in this video and the item you purchase. Please review all product specs prior to purchase."
Powerful Heavy-Duty MP Series 1-HP Motor
Low 1400 RPM creates less noise & wear
60 dBA is ideal for indoor use where noise is an issue
Oil-Free MP100LF Dual Piston Pump System
4 CFM @ 40 PSI; 3 CFM @ 90 PSI; 125 PSI maximum
Has a 4000+ hour life cycle before wear; 30% more life before repair
Produces 25% more air compared to other 1-HP air compressor motors
10 Gallon Steel Air Tank
Kick-on pressure 90 PSI; kic-off pressure 125 PSI
Time to fill tank from empty to full - 4 minutes
Aftercooler Condenser
Heat exchanger cools the discharge air, condensation is pushed to dryer
Air Dryer With Activated Alumina Desiccant
Removes water vapor from compressed air to protect tools & machinery
Activated Alumina has a 4000 hour service life
Top Mounted Controls
Dual gauges so you can check tank & tool pressure at a glance
1/4" air outlet with a quick connector for fast hose changes
Thermal Overload Protector & Auto Drain
7.6 low amp draw; EZ1 drain lets you set frequency & duration
California residents see
WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov.