Needs to be purchased by customer to meet local code
Belt Drive With Sturdy Guard Housing
Provides more power, easy to maintain
60 Gallon Vertical Tank
ASME & CRN certified for safety to 135 working PSI
Convenient 1/2" ball-valve air outlet & 1/4" ball-valve drain
Produces 12.6 CFM At 40 PSI; 11.3 CFM At 90 PSI
Ideal for home & professional applications
Specifications
PK-6060V
Motor
Voltage
208-230 Volt AC
Phase
1-Phase
Magnetic Starter
No
Amp Draw
Consult Certified Electrician
Recommended Breaker
Consult Certified Electrician
Engine
HP
3
Pump
CFM
11.3
CFM Rated @
90 PSI
Pump Material
Solid Cast Iron
Max PSI
135 PSI
Oil Sight Glass
Yes
Pump Type
Single-Stage
After Cooler
No
Pump Drive
Belt Drive
Oil Type
Oil Lubricated
Oil System
Splash Lubricated
Pump Low Oil Shut-off
No
Tank
Tank Size
60 Gallons
Tank Outlet
1/2 Inch
Electronic Drain Valve
No
Tank Orientation
Vertical
Filter
Regulator
No
Accessories
Pressure Gauge
Yes
Air Dryer
No
Overview
Weight
305 Pounds
Certification
ASME
Consumer Warranty
1 Year
Product Length
31 Inches
Product Width
29 Inches
Product Height
71 Inches
Power Type
Electric
UPC
0636084260612
Additional Model Numbers
PK6060V, PK-6060V
Reviews
Puma PK-6060V Reviews & Ratings
Customer Photos and Videos
Product Q&A
Product QuestionsAnswered by Joshua. the Air Compressor Expert
Question
+−
Can I use 30 weight non-detergent motor oil or Powermate Px P018-0084SP 100% Full Synthetic Air Compressor Oil in this compressor?
David B.
from Maryland
November 05, 2019
Answer
Non-detergent air compressor oil only. You can use the Powermate P018-0084SP. I recommend sticking with full synthetic oil.
Was this answer helpful?
Yes
0
No
0
Question
+−
What type of oil is recommended, and how much oil is needed when I change the oil?
Joseph P.
from Pennsylvania
September 14, 2019
Answer
In the product manual on page 7, they recommend SAE10-30W non-detergent pump oil. They do not list a specific capacity, just to keep the oil level between the "up" and "low" level on the oil stick.
Was this answer helpful?
Yes
0
No
0
Question
+−
What is the duty cycle for the pk6060v model?
Tim
from California
June 02, 2016
Answer
Puma, like most manufacturers, does not state the duty cycle of their compressors, but a 50% duty cycle is common for most consumer grade compressors.
We recommend sizing the compressor 1.25-1.5 times the CFM of your tool for continuous operation. If the compressor does not produce enough air volume, CFM, then the pressure will drop.
Reciprocating (Piston) compressors are not designed for continuous or 100% duty cycle. The compressor will cycle off & on if it is sized correctly.
Was this answer helpful?
Yes
1
No
0
Question
+−
Hi steve can I use sch 40 pvc pipe to feed air from the compressor to the wall outlets or do I need to use copper or galv pipe?
Frank Kirk
from Washington
April 18, 2014
Answer
PVC pipe is not recommended because serious injury can occur should the PVC pipe fail when under pressure. We recommend copper, galvanized steel pipe or the RapidAir system. Here's the link:
http://www.aircompressorsdirect.com/tools/rapidair.html
Was this answer helpful?
Yes
1
No
0
Recommended Accessories
Expert Recommended AccessoriesSelected by Joshua, our Expert
Required Accessories9
These accessories are required to properly setup/install this product.
Optional Accessories10
How-To Articles
How to Pick the Perfect Single-Stage Compressor
Some homeowners need air compressors occasionally for inflating tires, running ...