Product Video Disclaimer: "PED is not responsible for any variances from the product in this video and the item you purchase. Please review all product specs prior to purchase."
100% Cast-Iron Cylinders and Frame •Designed for the toughest 100% continuous duty applications
Manual Thermal Overload Protection •No magnetic starter needed and protects motor from damage
OSHA Compliant •Fully enclosed flywheel, belt and motor sheave
Fully Tested •All units are prewired and thoroughly tested prior to shipment
Motor
Voltage
230 Volt AC
Phase
1-Phase
Magnetic Starter
No
Engine
HP
3
Pump
CFM
10.3
CFM Rated @
90 PSI
Pump Material
Solid Cast Iron
Pump Type
Single-Stage
Max PSI
135 PSI
Oil Sight Glass
Yes
After Cooler
No
Pump Drive
Belt Drive
Oil Type
Oil Lubricated
Oil System
Splash Lubricated
Pump Low Oil Shut-off
No
Tank
Tank Size
60 Gallons
Tank Outlet
1/2 Inch
Electronic Drain Valve
No
Tank Orientation
Vertical
Overview
Certification
UL/CSA/ASME
Weight
300 Pounds
Product Length
20 Inches
Product Width
23 Inches
Product Height
66 Inches
Consumer Warranty
1 Year
Commercial Warranty
1 Year
UPC
678384222686
Model
SS3L3
Download Documents
No documents available at this time
1 Question
Q: I am trying to compare Ingersol Rand w/the porter cable. IE...will one support a D.A. and a spray gun at the same time better than the other. Price comparison, Noise level, etc... by Nunya from Illinois on October 26, 2011
A: The most important factor in determining if a compressor will work for a particular piece of equipment is CFM. Do you know what the CFM requirements are for the D.A. and spray gun? Once you know that, you can look at the CFM that the compressor puts out and match that to your needs. As far as noise level goes, unfortunatly the compressor manufacturers don't publish the decibel levels for their compressors, so there is no way to compare the noise levels of compressors. by Steve, Product Expert
This unit is built in the USA to meet the demands of continuous-duty use.
The cast iron cylinders and frame are built to be dependable and last a long time, even in high demand environments.
Since this model is also meets OHSA standards, and is UL, CSA, and ASME approved it has earned it seat in our "Better" slot.
If you need more "oomph" than a 3HP unit can deliver, please take a look at the 5HP that earned our "Best" ranking.
Steve Recommends This Model
Was this review helpful?
4616
Chuck
27 Helpful Votes
REVIEWED
MAR.
14
2013
Ok For The Money
No problems within the first year except a loose belt and dirty little air filters.
The filtration system on this compressor should only be put on a vacuum cleaner. Once a larger filter is in use the pump can breath and work without starvation. The smaller filter is good for business because it shortens the life of the product.
Was this review helpful?
271
Dan Jacobs Springfield, OH
27 Helpful Votes
REVIEWED
NOV.
16
2008
"v" Style Air Compressors Are Quieter
My suggestion is to stay away from vertical piston air compressors. I recommend buying the "V" style twin cylinder compressors that are low RPM verses high RPM, since the low RPM machines last much longer and are much quieter.
ACD RESPONDS: Just enter "twin cylinder" into the Search box to see the V twin models we offer.
Was this review helpful?
276
David B. Youngsville, NC
12 Helpful Votes
REVIEWED
NOV.
18
2013
Was Great For The First Year
3 days after the warranty expired both capacitors blew out then the auto start blew and now the small line that goes into the power box to tell it to cut off when it's full is leaking.
I bought it because I thought it was a durable American company but it's made in India- go figure.
Pros:Easy To Use, Price
Cons:Low Quality, Durability
Product Expert
David,
Ingersoll Rand is still an American company. They now sell their products all over the world. In order to meet the demands of a large market they source their components globally- however, no matter where the components are made they must still meet Ingersoll Rand's strict quality standards.
This unit has a 1 year Factory Warranty that begins the day the unit is delivered. I checked our files, but didn't see an order listed for you- so I'm sorry I can't tell you the exact date. You may want to check your delivery date, and give the folks at Ingersoll Rand a call, toll free, at (800) 866-5457 to see if they can help you out.
Please be sure to have your serial number handy when you call Ingersoll; they will most probably ask for it.
The "product expert" should have a look at the compressor he's an expert on. The compressor has a clearly stamped plate "Made in India". I'm pretty sure about this, I own one.
If you're going to put yourself out there as an expert it might be good to at least read the label.
ACD RESPONDS: Thank you for letting us know- we've updated our product page accordingly.
Our product expert doesn't get the chance to examine each air compressor individually, but he does have over 20 years experience in the air compressor/air tool industry.
The "product expert" should have a look at the compressor he's an expert on. The compressor has a clearly stamped plate "Made in India". I'm pretty sure about this, I own one.
If you're going to put yourself out there as an expert it might be good to at least read the label.
ACD RESPONDS: Thank you for letting us know- we've updated our product page accordingly.
Our product expert doesn't get the chance to examine each air compressor individually, but he does have... more
Was this review helpful?
1711
Adam C. Long Beach, CA
Purchased 6/18/15
REVIEWED
JUL.
21
2015
Amazing Compressor
This compressor was a major step up for me. I use quite a bit of air in my garage. I'm not a professional however I use many different tools from wood working to cleaning to auto mechanic work. This compressor meets my needs and then some.
I love that it's not obnoxiously loud like my last one.
Pros:Easy To Use, Durable, Quiet, Exceeded Expectations
Adam Recommends This Ingersoll Rand Product
Brand Rep
Adam,
Thank you for taking the time to review our product! We highly value your opinion and we are more than happy to have met your compressor needs.
Replaced noisy oil free compressor. This has made my wife happy living without all of the noise.
Pros:Easy To Use, Quiet, Fast, I'd Buy It Again
William Recommends This Ingersoll Rand Product
Was this review helpful?
62
Hugh Somerville, MA
Purchased 6/19/12
REVIEWED
JUL.
11
2012
Not Your Father's Ir
Worked fine the first day. The second day the motor had to be replaced (literally). It's not a Baldor like we were expecting but something made in Mexico. The pump is made in India.
This is not your father's IR compressor. IR, however, is an easy company to deal with so we have had no trouble (yet) in arranging for a motor replacement.
Product Expert
Hugh,
IR uses pumps that meet their performance requirements; they don't specify a brand on this model.
The air filter holder is made out of plastic, so when the compressor got hot the filter nipple broke apart and feel out of the compressor. Just after 5hrs running time the oil looked like it had silver specks in it so I changed it out and it appeared to have a lot of metal in it. After 1 week of use I changed it again still had metal particles in it.
It runs daily for 12 hour's, cycling on 1.5 min. and off 2 min.
Would recommend for light duty only.
Product Expert
John,
It sounds like the air requirements of your equipment may be higher than the air output, CFM, of this compressor.
We recommend sizing the compressor 1.25-1.5 times the CFM of your tool for continuous operation. If the compressor does not produce enough air volume, CFM, then the pressure will drop.
Reciprocating (Piston) compressors are not designed for continuous or 100% duty cycle. The compressor will cycle off & on if it is sized correctly.
Just add up the CFM of the air tools that will be in use at the same time to get the minimum CFM required.
A local IR service dealer can check the compressor to make sure that it is operating correctly. Here's the link to the IE service center locator:
http://www.ingersollrandproducts.com/contactus/SearchCenter/contactus_am_en.aspx?s=c&rid=1&rnf=&uid=&lid=1&sales=0&services=1
We apologize for the issues you are having with you compressor. As Steve stated above, your local IR service center can ensure there are no issues with your current compressor. Additionally, mirroring Steve's comments, based on your usage mentioned above, a rotary air compressor may be a better fit for your application. Please feel free to contact me if you would like to discuss your compressor purchase. Thank you for your business. We certainly want to make sure that you are fully satisfied with your purchase.
This has been a good compressor I've had for 5 years now with moderate to heavy use.
It has broke a few time though the automatic starter quit within 1 year and still acts up with the new one from time to time you just have to walk over and smack the starter. The head gasket has also blown twice.
Product Expert
Mike,
Please remember that this unit comes with a Factory Warranty from Ingersoll Rand. It covers defect in materials and/or workmanship for 1 year.
You need to do the maintenance recommended in the Owner's Manual to keep the Warranty in effect.
I upgraded from a small 2 gallon compressor to this bigger unit..... had moved on from just using a framing nailer to bigger things in the garage - impacts, rolling jack on a four post lift, cut off wheels etc. Needed a much more capable unit.
The price difference between a big 110V unit and a small 220V unit was not huge, so I jumped up into the 220V bracket. So far, very impressed, I can do a lot of minor work without the compressor kicking on, and when it does, the noise is much less than smaller compressors.
I purchased the IR start-up kit for the additional warranty. Don't forget to include the price of regulators and other piping, isolating feet etc. I used hockey pucks for the feet, and it's plenty stable enough without bolting it down to the floor.
I upgraded from a small 2 gallon compressor to this bigger unit..... had moved on from just using a framing nailer to bigger things in the garage - impacts, rolling jack on a four post lift, cut off wheels etc. Needed a much more capable unit.
The price difference between a big 110V unit and a small 220V unit was not huge, so I jumped up into the 220V bracket. So far, very impressed, I can do a lot of minor work without the compressor kicking on, and when it does, the noise is much less... more
We currently CANNOT ship this product to Alaska, California, Hawaii, Tennessee, Connecticut, Maryland, Massachusetts, Mississippi or any destination outside of the United States
Shop for the Ingersoll Rand 3-HP 60-Gallon Single-Stage Air Compressor (230V 1-Phase) at Air Compressors Direct. Research Ingersoll Rand 678384222686 single stage air compressors online. Find Ingersoll Rand SS3L3 single stage air compressors & 230V-1 60 gal compressor ss3l3 features and specifications. Get the best deal; compare Ingersoll Rand SS3L3 prices now. Buy the SS3L3 direct and save.
&p[url]=https://www.aircompressorsdirect.com/Ingersoll-Rand-SS3L3-Air-Compressor/p688.html&p[summary]=Buy Ingersoll Rand SS3L3 Direct. Free Shipping. Tax-Free. Check the Ingersoll Rand 3-HP 60-Gallon Single-Stage Air Compressor (230V 1-Phase) ratings before checking out.&p[images][0]=https://www.aircompressorsdirect.com/products-image/280/SS3L3_688_600.jpg)
 ratings before checking out. "Pin It!")
